Halvarssons Walkyria ladies jacket in black (HAL705)
Product InformationThe Walkyria jacket is a pretty amazing jacket from Halvarssons. The Walkyria jacket has the comfort of a typical Halvarssons jacket and, most amazingly, its priced like a typical Halvarssons jacket. But the Walkyria is actually constructed from a two-layer laminate material.
Now, these days, most serious motorcyclists know the difference between a drop-liner Jacket and a laminated jacket but, for those who don't, here's a quick synopsis. A drop-liner jacket has a separate waterproof membrane that is suspended inside the outer layer. 99% of waterproof jackets and pants are constructed in this way as well. And the method works. But in persistent and prolonged rain, the outer material will eventually 'wet-out'. The jacket will become heavy, and because there's so much rain water absorbed by the outer material, the rider can become cold, and eventually wet.
For most riders, such conditions are quite rare. The other issue with a drop-liner garment is how long it takes for them to dry out. This is a problem for those who commute for, say, more than an hour into work because it means that in the evening when it's time to ride home, the suit might well still be wet. This is not very nice.
The other method of construction for textile motorcycle apparel is to use what is known as a laminated fabric, where the waterproof membrane is heat-sealed, on the inner side, directly on to the outer material. Because water cannot be so easily absorbed, the jacket will be more waterproof, and importantly it will dry out much more quickly; normally inside an hour. Now this is manna from heaven for commuters. But there are normally some downsides to laminated garments.
First, they're not always particularly comfortable because the fabric can be a little stiff. Second, they can be extraordinarily expensive; sometimes twice the price of the equivalent drop-liner product. But this is where Halvarssons really has re-written the rule book. First because the Walkyria is incredibly comfortable. There's virtually no stiffness to the material. It simply doesn't feel like a laminated jacket. The second shocker is the price!
On the outside of the jacket there is a supremely durable Teflon water repellant. For abrasion resistance, the jacket is lined in all the key vulnerable areas with Halvarssons' Hi-Art lining that increases the strength of the outer material by 500%. For thermal protection, the Walkyria has a removable Outlast lining backed with Thinsulate; this is the same as in the Prime and Prince. Obviously, there's CE approved armour in the elbows, shoulders, and this is Level 2 armour. There's a pocket for a back protector. There's good venting on the front of the jacket, and an open vent on the back to allow air to exhaust out of the jacket.
The top can be attached a trouser. There are waist and sleeve adjusters on the jacket. There are numerous reflectors all over and, as with the Prime and Prince, you get a removable hi-vis vest. We really cannot stress too much just how amazing this package is. For a more detailed size chart, please see here.
- Textile 2 layer
- Teflon coated
- HI-ART reinforced
- Dryway+ laminated membrane
- Outlast temperature regulating, removable liner with Thinsulate
- Adjustable CE-approved armour Level 2
- Can be complemented with our CE-approved back protector SECURE L2 (see here for our recommendation)
- Ventilation, expanded system with open yoke at the back, contributing to increased circulation
- Attachable to pants
- Adjustable jacket & sleeve width
- Removable hi-vis vest