Skip to main content

Belstaff Humber jacket in black

(BEL2921)

£472.50

Finance available with Omni Capital Retail Finance from £ per month
More Info

No Image

Alternative Views

Belstaff Humber jacket in blackAlternative Image1
Belstaff Humber jacket in blackAlternative Image3
Belstaff Humber jacket in blackAlternative Image5

Please select a size.

Upgrade options

Belstaff Humber jacket in black Product Information

The outer chassis of the Belstaff Humber is identical to that of the classic Brooklands jacket. That is to say that it's made from a British Millerain fabric that is known a Ultracore. Now unlike traditional waxed cotton Ultracore comprises a mix of cotton and Polyester. Belstaff suggests that the material used on the Humber is equivalent to an 8-ounce waxed cotton.
 
What does this mean? Well it means that there's some heft to the Humber. As a shorter blouson-style jacket you could potentially wear it in the summer months, but it's never going to flow a lot of air.
 
And that's because a combination of a waterproof membrane and the wax coating of the outer shell will both act as barriers to breathability. The upside here is that the Humber will do a good job of keeping the wind at bay and helping you to stay warm. The combination of the wax and the membrane also mean that this is a jacket that is unlikely to ever leak, so to speak.
 
From an abrasion-resistance perspective the Humber rates AA, which is all you'd ever want or expect in a jacket of this ilk. Make a jacket like this in an AAA fabric and you would feel the penalty in terms of weight and comfort.
 
The armour in the Humber is vented Level 1 D3O, but it's the shaped stuff and not Ghost. And this we think is the right choice for the jacket. Flat Ghost armour would move around too much. The armour that Belstaff has fitted also gives the jacket a better, more defined shape, especially in the shoulders.
 
There's a pocket for a back protector. We'd probably go for a Level 2 protector from Rheon. It's nicer, more flexible and a lot more breathable than the equivalent from D3O. At just £49.99, it's also a bit cheaper.
 
In terms of pockets you get one zipped one on the chest and two hand-warmer style pockets below. There's a Napoleon pocket with a zip for your wallet inside the jacket.
 
For added ventilation you get one vent on each bicep.
 
The main zip up the front of the jacket, like the ones on the pockets and the vents, are in an antique brass finish. All the zips, as one might hope, are YKK. 
 
Behind the main zip which, of course, is not waterproof there's a storm flap with a rain gutter to ensure that rain is not getting through the front of the jacket to the body.
 
To adjust the fit at the hem you get a two-position popper arrangement. You get the same at the ends of the sleeves. What you don't get are zips at the ends of the sleeves, but then again you don't get them on any Belstaff jacket. Again all the poppers are finished in antique brass. All except the one at the base of the zip that is rubberised to protect the bike's tank.
 
As with all Belstaff jackets you get corduroy lining the collar. You get a plaid interior. And on the shoulders and elbows you get padded baffles. Are they there for added protection? Well probably not; they’re more about styling than function. The back of the jacket is very marginally lowered, although to an extent that is going to make next to no difference on the bike. You also get a couple of elasticated loops that are designed to allow you to fasten the jacket to a pant via a belt.

Specification

  • British Millerain Ultracore outer chassis
  • Equivalent to 8-ounce waxed cotton (52% cotton/48% polyester)
  • Level 1 Tri-vented D3O armour in elbows and shoulders
  • Pocket for back protector
  • Seam-sealed waterproof membrane
  • Traditional plaid lining
  • Elasticated loops to connect jacket to a trouser belt
  • All zips in antique brass. All by YKK
  • Rain gutter behind main zip
  • Poppered adjuster at neck, at hem and at base of zip
  • Poppers at ends of sleeves
  • Popper at base of zip is silicone covered
  • Additional padding on shoulders and elbows
  • Zipped vents on biceps
  • Corduroy in neck and sleeve ends

Warranty

Belstaff jackets have a two year warranty

Product Reviews

Leave us your review

Please enter a display name
Please enter a display name with less than 50 characters
Please enter an Email Address
Please enter a valid Email Address
(1 Worst - 5 Best)
Please select a Rating
Please enter a Heading
Please enter a review heading with less than 100 characters
Please enter a review
Please enter a review with less than 4000 characters
Please confirm you are not a robot.
We have been unable to verify your identity, please confirm you are not a robot.

Finance Options

See below for the different finance options available to you for this product. Of course, you can finance more than one product. Just select Finance at the payment page and the finance options for your entire basket will show.

Deposit Amount: £

Monthly Payments: £

Loan Amount: £

Payment Term: months

Total Amount Payable: £

Making payment easy

There are clearly benefits to paying for your motorcycle gear in instalments.

Over 12 months, on products costing over £400, you'll pay no interest whatsoever


What do I need to do?

It's very simple. Firstly, you need to make sure you are in the UK mainland, Isle of Wight, or Northern Ireland.

When you reach the 'checkout' page on the website, just click on the Finance Application option.

Select your finance option and press apply now. You will be presented with an application form,

which is very straightforward to complete.  

Occasionally, the lender may require further information before progressing.